Overture PETG 3D Printer Filament 1.75mm -6pack – Overture 3D

€ 78.99 · 4.5 (229) · In Magazzino

Visit "About Us" page to see the complete version of this video. INTRODUCTION Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High
Visit About Us page to see the complete version of this video. INTRODUCTION Overture PETG filaments are made of premium PETG resin which combines the advantages of PLA and ABS such as odorless, esay-to-print, little shrinkage rate; Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility Over 8 years experience of researching and manufacturing 3D printer filaments, Overture care about every detail when we design our spool and filaments.? Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied. SPECIFICATIONS Young’s modulus (X-Y) 1472 ± 270 (MPa) Tensile strength (X-Y) 31.9 ± 1.1 (MPa) Elongation at break (X-Y) 6.8 ± 0.9 (%) Bending modulus 1174 ± 64 (MPa) Bending strength 53.7 ± 2.4 (MPa) Charpy impact strength 5.1 ± 0.3 (kJ/m2) FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing.

3D Printing Solutions > 3D Printer Store > Overture PLA+ Light Grey 1kg 1.75mm Filament

PETG Filament 1.75mm 5KG PLA For 3D Printer — Kingroon 3D

I'm excited to see Overture offer cardboard spools for their PLA. I'm glad the company is seeing the opportunity to become more sustainable. : r/3Dprinting

OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables 1kg Spool (2.2lbs) Dimensional Accuracy +/- 0.05 mm Fit Most

Visit About Us page to see the complete version of this video. , INTRODUCTION, Overture PETG filaments are made of premium PETG resin which combines

Overture PETG Filament 1.75mm

Print More for Less: A Quick Guide to Find Cheap Filament

Overture OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 2kg Filament(4.4lbs), Dimensional Accuracy 99% Probability +/- 0.03 mm, Fit

OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer (6 Color (6-Pack))

Overture - Petg 3D Printer Filament - Starry Blue - 1.75 mm/1 kg

TPOIMNS PETG Filament 1.75mm, 3D Printer Filament, 1kg Roll Spool(2.2lbs), Dimensional Accuracy +/- 0.02 mm, Compatible with Most FDM 3D Printers, Bla