Board with ATmega32U4 microcontroller compatible with Arduino Pro Micro - Kamami on-line store

Board compatible with Arduino, equipped with the ATmega32U4 microcontroller

MultiWii NanoWii ATmega32U4 Micro Flight Controller USB/GYRO/ACC - Kamami on -line store

The Micro is a microcontroller board based on the ATmega32U4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

Arduino 5V Micro with Headers

Pro Micro (Micro-USB) - 5V/16MHz - Arduino-compatible ATmega32U4 – Keebio

running at 5V/16MHz Supported under IDE v1.0.1 On-Board micro-USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os

OSOYOO Pro Micro 5V/16MHz Module Board with 2 Row pin Header Replace wit Pro Mini for Arduino

Small Compatible with Arduino board. Includes Reset button, 9x 10-bit ADC pins. 12x Digital I/Os (5 are PWM capable). Note: Board only. Additional

SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator

Qduino Mini is a tiny, Arduino-compatible board with ATmega32u4 (8MHz, 32kB Flash, 2kB RAM), a LiPol battery connector and charger built-in. SparkFun

Qduino Mini - Arduino Dev Board with ATmega32u4

ATmega32U4 running at 5V/16MHz Supported by IDE v1.0.1 Rx and Tx Hardware Serial Connection 4 x 10-bit ADC pins, 12 x Digital I/Os On-Board Type-C

AITRIP 2PCS Pro Micro ATmega32U4 5V 16MHz Type-C Development Module Board with 2 Row pin Header Compatible arduino Leonardo Replace ATmega328 Pro Mini

Microcontroller board based on the ATmega32u4

Board with ATmega32U4 microcontroller compatible with Arduino Leonardo

ATmega32U4 Pro Micro Controller Board for Arduino Pro Micro Type-C USB 5V

OSOYOO Pro Micro 5V/16MHz Module Board with 2 Row pin Header Replace wit Pro Mini for Arduino : Electronics

Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino

CT-UNO-SE - development board with ATmega328P microcontroller

Pro Micro (Micro-USB) - 5V/16MHz - Arduino-compatible ATmega32U4 – Keebio

Inland PRO MICRO Development Board Arduino Compatible; ATmega32u4 Microcontroller; 32KB Flash Memory; 2.5KB SDRAM - Micro Center

OSOYOO Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row Pin Header for Arduino Leonardo Replace ATmega328 Pro Mini

Board with ATmega32U4 microcontroller compatible with Arduino Pro Micro - Kamami on-line store